MS60 Black Mamba FHG is made of mono component MS polymer adhesives. These adhesives react with the humidity in the air and offers optimal sealing even in under pressure. The main advantage with this product is the speed at which skin can form as well as the curing speed in which 100% of the active matter reacts.
It is recommended to use this product in temperatures varying between -40 and 140°C but optimal qualities are achieved between 5 and 35°C. Shrinkage is at 1% and the elongation at break can go up to 400% which enables it to resist to impacts, vibrations and peeling. It is resistant to water, UV exposure, yellowing and aggressive environments such as alkaline, diluted acids, polar solvents, oils and more.
Install a sink in just 10 seconds.
- Run a 3/4 inch bead, run the excess around the rim.
- Dont need to use other Caulk
- No clamps or hardware required
- Superfast sealant