Alpha Dry Core Bit

Designed for Jobsite Drilling of Faucet-Mounting Holes in Countertops and Vanities Very Fast Cutting On Granite/Quartzite and Engineered Stone Convenient Dry Application High-Quality Aggressive Core Bit Make Clean Rounded Corners for Square or...

Alpha Ecoguard for Core Drilling

Wet/Dry Cover for Drilling and Core Drilling Applications Fits Most Vacuum Dust Hoses Contains Dust and Water When Drilling with Up To A 2-1/2” Bit Can Be Secured On Horizontal and Vertical Surfaces with Vacuum During Application Cost-Effective...

Anchor Bit Vacuum Brazed 3/16 Shank 1/4

For drilling anchor holes to install undermount sink. 3/16" bit size with 1/4" round shank. Vacuum brazed diamond bit is very aggressive on granite, marble and other types of stones

Apexx 1-1/2 Dekton Thin-wall Core Bit 5/8-11

APEXX Blue Thin Wall core bits are designed for 3cm Dekton, Lapitec, Neolith, Geoluxe and other Ultra-Compact Surfaces. Same diamond/bond as green APEXX porcelain core bits which have been approved by Cosentino for Dekton. Drilling depth 2 inch (New)...

Apexx 1-3/8 Dekton Thin-wall Core Bit 5/8-11

APEXX Blue Thin Wall core bits are designed for 3cm Dekton, Lapitec, Neolith, Geoluxe and other Ultra-Compact Surfaces. Same diamond/bond as green APEXX porcelain core bits which have been approved by Cosentino for Dekton. Drilling depth 2 inch (New)...

Apexx 2 inch Stainless Reverse Thread Adapter

Reverse 1/2" Gas to Reverse M12 Adapter

Apexx 2in Dekton Thin-wall Core Bit 5/8-11

APEXX Blue Thin Wall core bits are designed for 3cm Dekton, Lapitec, Neolith, Geoluxe and other Ultra-Compact Surfaces. Same diamond/bond as green APEXX porcelain core bits which have been approved by Cosentino for Dekton. Drilling depth 2 inch (New)...

Apexx 3 inch Stainless Reverse Thread Adapter

Reverse 1/2" Gas to Reverse M12 Adapter

Apexx 4 Inch Stainless Reverse-Thread Adapter

Reverse 1/2" Gas to Reverse M12 Adapter

Apexx Adaptor RouterBIT M10-7/8 TO GAS-1/2 MALE SHINE

For FLEX routers

Apexx Brazed Anchor Bit (T-31 Bit) 1/4 shank x 3/16 head

Apexx Brazed T-31 Anchor Bits are used for drilling anchor holes. Long life thanks to vacuum brazing technology. Fast cutting. Shanks: 1/4" & 3/8" Sizes: 3/16", 1/4", & 3/8

Apexx Brazed Anchor Bit (T-31 Bit) 3/8 shank x 3/16 head

Apexx Brazed T-31 Anchor Bits are used for drilling anchor holes. Long life thanks to vacuum brazing technology. Fast cutting. Shanks: 1/4" & 3/8" Sizes: 3/16", 1/4", & 3/8"