Apexx Gold Resin-Filled Zero Tolerance Wheel

  APEXX Resin Filled Zero Tolerance Wheels       No-color resin eliminates the chance of discoloration   Well balanced and tested   Material: Engineered Stone, Granite   Dry or wet use   Curved segments reduce...

Stinger Zero Tolerance Wheel - Segmented

-Segmented wheels are effective and aggressive for stock removal-Can be used wet or dry on all hard stones-Available in 2in and 3in with 5/8in 11 thread **Ships in 2-3 business days**

Stinger Zero Tolerance - Resin

-Resin filled wheels reduce the amount of vibration when grinding-Can be used wet or dry on all hard stones-Available in 2in and 3in with 5/8in 11 thread **Ships in 2-3 business days**

Stinger 2x2 Stock Removal Wheel

-Stock removal wheels can grind down stone with minimal chipping-Designed for fast grinding and stock removal-Available in 5/8in 11 thread  

Cyclone Polishing Drum Wheels

Edge polishing for sink cut-outs Recommended use: Oscillate up and down for proper even drum wear Rubber drum increases tread life & reduces vibration 5/8 – 11 female thread (M18 x 2)

Cyclone Vacuum Brazed Wheels

Vacuum brazed, available in coarse #30, medium #50/60 and fine #100 The fastest way to remove material after cutting out sink holes with a diamond blade, or to shape a radius on the outside edge. 5/8″-11 thread with a center water feed

Apexx Brazed Sink Wheel 2x2x5/8-11

Apexx Brazed Sink Drums are great for extra fast stock removal. Perfectly balanced. Dry or wet use

Apexx Brazed Sink Wheel 1x2x5/8-11 No-Bearing

Apexx Brazed Sink Drums are great for extra fast stock removal. Perfectly balanced. Dry or wet use

Apexx Brazed Sink Wheel 1/2x2x5/8-11 No-Bearing

Apexx Brazed Sink Drums are great for extra fast stock removal. Perfectly balanced. Dry or wet use

Apexx Brazed Sink Drum with Top Bearing 3in 30 grit

Apexx Brazed Sink Drums with Top Bearing are designed for Park Wizard & Fab King machines. Perfectly balanced. Dry or wet use

40mm Joint Clean-up Bit

To be used after the lamination and before. Z15 will clean up the middle part, it should be used before using a 2-piece router bit such as V or FV. Z40 will clean up more - through the bottom of the stone. It can be used before almost all the shapes...

NSI Rapid Z-Drum 1" Drum With Top Bearing

A 1in diameter vacuum brazed drum wheel, specifically designed for use with the Sink BULL. This is the bit you need to clean out the tight corner radius on square sinks. Available in two grits with a top bearing to ride along the template. The coarse...